Intended for general clean liquid flow measurement applications.
- Single direction powered insert with raw, scaled pulse and analog output
- Bi-directional powered insert with analog and scaled pulse output
- Battery-powered insert with a local and remote display and scaled pulse output
-
Operating TemperatureElectronics 14…150 °F
LCD –4…150 °F -
Maximum Pressure Rating Stainless Steel (Non Shock)1000 psi (68.9 bar) @ 70° F (21° C)
900 psi (62 bar) @ 100° F (37.8° C)
670 psi (46.1 bar) @ 140° F (60° C)
225 psi (15.5 bar) @ 180° F (82° C)
600 psi (41.3 bar) @ up to 140° F (60° C)
225 psi (15.5 bar) @ 180° F (82° C) -
Optimum Design Flow Range1…20 ft/sec. (0.30…6 m/sec.)
Extended flow range < 0.5…20 fps -
Pressure Drop0.5 psi or less at 10 ft/sec (3 m/sec.) for all pipe sizes 1.5 in. (38 mm) diameter and up
-
AccuracyStandard: to ±1% of rate over the optimum flow range
-
Straight Pipe RequirementsInstall the sensor in a straight pipe section with a minimum distance of 10 diameters upstream and 5 diameters downstream to any bend, transition, or obstruction.
-
Repeatability±0.5%
-
Enclosure
- Sensor- battery: Polypropylene with Viton® sealed acrylic cover. Meets NEMA 6P specifications
- Sensor: Polypropylene with Viton® sealed acrylic cover. Meets NEMA 4X specifications
- Remote: Polycarbonate w/ Neoprene® sealed cover. Meets NEMA 4X specifications.
-
Programming
- Battery-powered version: A-303 connector cable and SDI Series software
- Bidirectional, pulse, and analog versions: USB to DIC converter programming kit (840134-0002)
-
Display (Optional)
- 8 character, 3/8 in. (10 mm) LCD
- STN (Super Twisted Nematic) display
- Annunciators for rate, total, totalizer multipliers, low battery, flow direction
-
Accessories
- USB to DIC converter programming kit (840134-0002)
- ASDIB-20 programming kit- battery powered A-301 connector cable or USB
- Battery-powered version:
- 07101 5 ft (1.5 m) extension cable
- 07108 10 ft (3 m) extension cable
- 07102 20 ft (6 m) extension cable
- 07109 50 ft (15 m) extension cable
